Ceramic, porcelain stoneware, granite, marble and natural stone. As a certified company, we carry out KEIL undercut drilling for any format and thickness, with or without PVD coating, integrating all processes into a single production cycle.
The KEIL concealed fixing system makes it possible to create clean, elegant façades free from visible fixings. However, the success of the system does not depend on what can be seen from the outside, but on what happens on the rear face of each panel: the KEIL undercut drilling.
Even a minimal deviation in depth, diameter or positioning can compromise the correct operation of the fixing and cause problems during installation.
By the time an error is detected on site, the cost is already high.
Damage and scratches during handling. Dimensional mismatches. Communication errors between processes. Logistics delays. What may appear to be a coordination issue becomes a real cost once the material reaches the construction site.
KEIL drilling requires specific tooling, approved measuring devices and procedures certified by the manufacturer of the system itself.
An incorrectly machined panel may look completely perfect. The problem only becomes apparent when the anchor does not seat correctly — at the most expensive stage of the process.
Ceramic, porcelain stoneware, granite, marble or natural stone. Any format and thickness.
KEIL anchor drilling using certified tooling, with inspection of every individual hole.
Titanium applied in a vacuum chamber. Gold, silver, bronze, blue and violet finishes.
Delivered with the KEIL drilling verified and the finish intact. Fewer suppliers. Fewer risks. Greater assurance.
KEIL profiles are managed directly through KEIL Befestigungstechnik GmbH. We carry out the KEIL drilling so that the panels are fully compatible with the system, and we can put you in contact with KEIL if required.
Only need KEIL drilling without PVD coating? We also offer drilling as a standalone service for materials that are already finished or do not require coating.
PLASMADECOR has been trained and certified directly by KEIL Befestigungstechnik GmbH to carry out KEIL drilling. This certification confirms that we use the system-specific machinery, follow the procedures recommended by the manufacturer and verify every drilling operation using the inspection instruments established by KEIL.
This is not a marketing claim. It is direct validation from the manufacturer of the system.
You need to specify the concealed fixing system correctly from the outset of the project, with technical assurance backed by the manufacturer of the system.
You want to expand your range with products compatible with the KEIL system without investing in your own certified machinery. Drilling and coating can be carried out under your brand.
You need panels to arrive on site with the KEIL drilling already verified, without coordinating the manufacturer, drilling contractor and finishing supplier separately. One process, one point of responsibility.
Answers to the most common questions before the first conversation. If you need more detail, our team is available to help.
Tell us what you need. We will assess the technical feasibility and respond within 48 hours.
